amiko Loader upgrade tool
How to use Loader/upgrade tool for
Very Important: Please do not start this
process if you don’t have time to complete by sitting near
the receiver or any chance to cutt off your electricity. It will
damage your receiver’s flash chip and it will brick. You will need to replace the
motherboard in case of fail during the upgrade process
1.Connect pc and box with Rs232 line.
2.Open DongleUP.exe tool and press “Open” button to select correct file which you want to upgrade
3:Press “Start” button in DongleUP.exe tool.
4:Than turn “OFF” your receiver from the power button behind the box or to cut off your box’s electricity and turn it “ON” again.
5:Upgrade process will start. Now wait here for few minutes.
6:After successful upgrade, the box will reboot automatically
|amiko Loader upgrade tool|